Today was all about getting started on one of the bigger jobs — painting the bottom of La Sirena.
After plenty of preparation, I’ve finally started applying Pettit Odyssey antifouling paint. It’s good to see some actual color going onto the bottom after all the prep work and repairs.
I’ve started building up the coating around the rudder, through-hulls and other underwater fittings, paying particular attention to those areas that need good coverage and protection.
I’m also going back over the various chips, repairs and previously worked-on areas to make sure everything gets properly covered and protected.
It’s going to take a few coats and plenty of time on my back underneath the boat, but this is one of those jobs that needs to be done right before La Sirena goes back in the water.
Another big job underway — and one step closer to relaunch.
